Stainless Steel Flanges on Sale-manufacture,factory,supplier from China

(Total 24 Products for Stainless Steel Flanges on Sale)
According to customer requirements, it can be made of 45#, 40Cr, 30CrMo, 35CrMo, 42CrMo, 18CrNiMo7-6 and other materials. According to different weights, it can be forged on different forging equipment units. The weight of forged products can reach 6kg-500kg, Forging needs to be completed through heating, pre-forging, forming, trimming and other processes.Flange is also called flange plate or flange. Flanges are the parts that connect pipes to each other and are connected to pipe ends. There are holes on the flange, and the bolts make the two flanges tightly connected.
Contactar ahora
Our company uses the seamless rolling ring process, which makes the product more stable and can greatly reduce the weight of blanking and save cost. Forged flanges can be made of a wide range of materials including but not limited to 4140, 4130, 35CrMo, 20CrMnMO and can be forged and machined in a wide range of sizes and sizes ranging from 200mm to 3000mm in diameter.All of our forgings can be forged by hot-die forging, rough working, heat treatment and other processes, increasing the forging ratio and performance stability.
Contactar ahora
According to customer requirements, it can be made of 45#, 40Cr, 30CrMo, 35CrMo, 42CrMo, 18CrNiMo7-6 and other materials. According to different weights, it can be forged on different forging equipment units. The weight of forged products can reach 6kg-5000kg, Forging needs to be completed through heating, pre-forging, forming and other processes.Stainless steel forgings refer to the articles in which stainless steel materials are pressed to shape the required shape or suitable compression force through plastic deformation.This force is typically achieved by using a hammer or pressure.
Contactar ahora
Our unbiased research and improvement of double-hollow space forging procedure in baohua enterprise can significantly enhance the forging performance and decrease the blanking weight, and subsequently obtain the reason of fee saving. in line with unique weights, forging can be completed on distinctive forging gadget units, and the load of forged merchandise can attain 6kg-500kg. forging needs to be finished by means of heating, pre-forging, forming, trimming and different tactics.
Contactar ahora
Our company can independently design and process forging dies according to the drawings, and will try our best to save forging materials. The weight of the forged product can reach 60kg-5000kg, and the forging needs to be completed through heating, pre-forging, forming and other processes. Various materials including 42CrMo, 4140, 4130, 40Cr, 20CrMnMo, 18CrNiMo7-6, 410SS can be forged. Our company has API certificate and SQ1 certificate and has many years of experience in petroleum product processing.The casing head is usually made of 35 or 42 Cr Mo alloy structural steel.
Contactar ahora
Flange, also known as flange or flange. Flange is a part of connecting shaft, which is used to connect pipe ends; It is also used for flanges on the inlet and outlet of equipment, and is used for the connection between two equipment, such as reducing pipe flanges. Details are as follows:NAMEFlange On OilMATERIALA105-45KHARDNESS120-187INNER DIAMETER65.41OUTSIDE DIAMETER244.35Our Baohua Company was founded in 1969. After three generations' hard work, it now covers an area of 50,000 ㎡ and has a building area of 25,000 ㎡. There are 260 employees and 46 engineering technicians.
Contactar ahora
Baohua company was established in 1969, from the initial rough machining to further finishing production. From three sets of processing equipment to more than 80 sets of processing equipment and inspection equipment, all of them are based on the production concept of honesty and customer-oriented.We usually use 45 or 40Cr steel as the material for producing high-neck flanges.
Contactar ahora
Flanges used in oil fields require strong sealing and high quality, and our Baohua company has been processing flanges in oil fields for many years and indirectly exported them to foreign countries-Germany and Russia. Because the domestic industry is not ideal, we want to import and export directly with foreign customers, avoiding third-party fees, thus ensuring strong product quality and low price. The following table is the information of this product.
Contactar ahora
According to customer requirements, it can be made of 45#, 40Cr, 30CrMo, 35CrMo, 42CrMo, 18CrNiMo7-6 and other materials. According to different weights, it can be forged on different forging equipment units. The weight of forged products can reach 6kg-500kg, Forging needs to be completed through heating, pre-forging, forming, trimming and other processes.The design of forged steel and the abrasive tools for its production require initial costs.
Contactar ahora
Our baohua business enterprise is a kingdom-owned to non-public organization. the own family enterprise has a history of greater than 60 years, from the initial forging iron portions to the current hard processing, heat remedy and finishing of forgings. gadgets and device also intently comply with the requirements of present day product production. at present, there are extra than 80 processing gadget, in addition to zeiss cmm, japanese small board profiler, gear detector, ω mega tool setting tool and different inspection and detection gadget.
Contactar ahora
Flange, also known as flange or flange. Flange is a part of connecting shaft, which is used to connect pipe ends; It is also used for flanges on the inlet and outlet of equipment and for the connection between two equipment. There are holes in the flanges, and bolts make the two flanges closely connected.The flanges we process and produce are mainly used in petroleum and construction machinery and equipment industries. The materials used in processing and production are flexible and can be forged according to the shape and size provided by customers.
Contactar ahora
The torque arm on wind power refers to the part between the main shaft of the wind turbine and the rotor of the generator, which converts the torque transmitted by the rotating main shaft into the power that the generator drives the rotor to rotate, thus generating electric energy.The torque arm produced by our company is mainly used as accessories for wind power generation equipment. Raw materials are purchased from round steel with recognized quality at home and abroad.
Contactar ahora
Flange, also known as flange or flange. Flange is a part of connecting shaft, which is used to connect pipe ends; It is also used for flanges on the inlet and outlet of equipment, and is used for the connection between two equipment, such as reducing pipe flanges. There are holes in the flanges, and bolts make the two flanges closely connected. All connecting parts that are bolted around two planes and closed at the same time are generally called "flanges", such as the connection of ventilation pipes. Such parts can be called "flange parts".
Contactar ahora
Flange, also known as flange or flange. Flange is a part of connecting shaft, which is used to connect pipe ends; It is also used for flanges on the inlet and outlet of equipment, and is used for the connection between two equipment, such as reducing pipe flanges. There are holes in the flanges, and bolts make the two flanges closely connected. All connecting parts that are bolted around two planes and closed at the same time are generally called "flanges", such as the connection of ventilation pipes. Such parts can be called "flange parts".
Contactar ahora
The production of connector is mainly used in the accessories of oilfield wellhead equipment. We can design dies according to the drawings provided by you and carry out mass die forging, thus reducing the cost.The connectors produced by our company are mainly used in the petroleum industry. Raw materials are purchased from round steel with recognized quality at home and abroad. We can forge the corresponding model of dies and hammers according to customers' requirements, thus improving production efficiency and saving time.
Contactar ahora
The production of flange should go through a series of processing, such as casting blank, rough cutting, fine turning, boring, drilling, heat treatment, quality inspection, etc. We process the casing head in different stages according to the customer's requirements. And there are certificates such as API recognized by american petroleum institute, and the quality can be guaranteed. The flanges we process and produce are mainly used in petroleum and construction machinery and equipment industries.
Contactar ahora
Blind flange generally consists of flange body, sealing gasket and bolt. In order to ensure the sealing performance of blind flange, flange body and sealing gasket are usually made of stainless steel, carbon steel, copper, aluminum and other materials.NAMEBLIND FLANGE FINISHINGMATERIAL4130-75kHARDNESS207-237INNER DIAMETER313.4OUTSIDE DIAMETER479.55Our Baohua Company was founded in 1969. After three generations' hard work, it now covers an area of 50,000 ㎡ and has a building area of 25,000 ㎡. There are 260 employees and 46 engineering technicians.
Contactar ahora
According to customer requirements, 4140, 4130, 45 #, 40Cr, 30CrMo, 35CrMo, 42CrMo, 18CrNiMo7-6 and other materials can be made. Forging can be carried out on different forging equipment units according to different weights. The weight of forged products can reach 6kg-2000kg. Forging needs to be completed through heating, pre forging, forming, trimming and other processes to increase the forging ratio and stability of products. Flange forgings can be finished to meet the final assembly conditions.Threaded flange refers to a kind of flange which is connected with pipe by thread.
Contactar ahora
Flange, also known as flange or flange. Flange is a part of connecting shaft, which is used to connect pipe ends; It is also used for flanges on the inlet and outlet of equipment, and is used for the connection between two equipment, such as reducing pipe flanges. There are holes in the flanges, and bolts make the two flanges closely connected. All connecting parts that are bolted around two planes and closed at the same time are generally called "flanges", such as the connection of ventilation pipes. Such parts can be called "flange parts".
Contactar ahora
The cylinder head produced via our baohua business enterprise can be made of different substances in line with purchaser necessities. substances consisting of 45 #, 40cr, 30crmo, 35crmo, 42crmo, 18crnimo7-6, and so on. further, baohua agency has independently developed the double hollow space forging procedure, which could greatly enhance the forging efficiency and reduce the blanking weight, and in the long run gain the intention of value saving. forging is achieved on distinct forging equipment devices according to special weights. the weight of solid products can attain 6kg-500kg.
Contactar ahora
These hollow shaft may be crafted from ferrous and non-ferrous metals which include carbon steel, alloy steel, stainless steel, titanium, nickel, aluminum and device steelBAOHUA produces solid gear, ring gear shapes for single, double and different close to internet shapes for completing into numerous unique shapes.OUR FORGED GEAR SHAPES & ALLOYSHelical GearsBevel GearsHypoid GearsWorm GearsSpiroid GearsTorsoing GearsBAOHUA uses a seamless rolled ring process to provide forged gear manufacturers with shape, size and material flexibility, lower volume requirements and near-finished shapes t
Contactar ahora
BAOHUA produces solid gear, ring gear shapes for single, double and different close to internet shapes for completing into numerous unique shapes.OUR FORGED GEAR SHAPES & ALLOYSHelical GearsBevel GearsHypoid GearsWorm GearsSpiroid GearsTorsoing GearsThese forged gear shapes may be crafted from ferrous and non-ferrous metals which include carbon steel, alloy steel, stainless steel, titanium, nickel, aluminum and device steel.Forging gear and ring gear blank processBAOHUA uses a seamless rolled ring process to provide forged gear manufacturers with shape, size and material flexibility, lower
Contactar ahora
For the production of cylinder head merchandise, our business enterprise can forge and bring cylinder head products by way of the use of many kinds of materials, together with forty five#, 40cr, 30crmo, 35crmo, 42crmo, 18crnimo7-6 and so forth, in step with purchaser requirements. similarly, our company has unbiased research and improvement of double-die cavity forging process, that could substantially improve the forging performance and reduce the load of blanking, and in the end achieve the purpose of cost saving. in step with the load, forging is finished on unique forging device gadgets.
Contactar ahora
BAOHUA produces forged gear, ring gear shapes for single, double and other near net shapes for finishing into several different shapes. OUR FORGED GEAR SHAPES & ALLOYSHelical GearsBevel GearsHypoid GearsWorm GearsSpiroid GearsTorsoing GearsThese forged gear shapes can be made from ferrous and non-ferrous metals including carbon steel, alloy steel, stainless steel, titanium, nickel, aluminum and tool steel.Forging gear and ring gear blank processBAOHUA uses a seamless rolled ring process to provide forged gear manufacturers with shape, size and material flexibility, lower volume requir
Contactar ahora
Relate News
In order to fully implement the spirit of the central, provincial, municipal and district economic work conferences, better summarize last year's work, praise and encourage the advanced, and deploy this year's development tasks, on the morning of February 3, 2023, Puji Street held a commendation meeting on the development of the real economy.
    After decades of hard work, we have been forging ahead for another year. On January 19th, 2022, before the Spring Festival, a traditional festival in China, Baohua Company distributed Spring Festival benefits to all employees.
On the afternoon of July 7, 2023, the observation and appraisal activities of key projects in Zhangqiu District of Jinan City were held to test the effectiveness of the project construction in the whole region, guide all departments and cadres in party member to go all out to grasp the project, stabilize investment, promote development, and promote green, low-carbon and high-quality development in the whole region.After inspecting the project construction and product production process in our Baohua Company, the district leaders put forward that we should persistently seek, introduce and grasp
In order to carry out the opinions of Zhangqiu District Committee on the implementation of the construction of strong industrial zones driven by "twin links" and enabled by high-quality industrial chains, conscientiously strengthen the construction of non-public enterprise parties, create a new model of economic development for the entity with Party building and enabling, gather new resultant force for high-speed development, and give full play to the advantages of industrial linkages and similar regions, September 23, Puji Street held the founding of the forging machinery industry c
In order to raise out the opinions of Zhangqiu District Committee on the implementation of the building of robust industrial zones pushed by way of "twin links" and enabled by using wonderful industrial chains, rigorously support the development of personal organization parties, create a new mannequin of financial improvement for the entity with Party constructing and enabling, accumulate new resultant pressure for high-speed devel
I attended the 23rd China International Petroleum and Petrochemical Technology and Equipment Exhibition in Beijing. I met and met many old and new friends engaged in the petroleum industry at the exhibition. I wish us better and better development.Our Baohua company has API Q1 and API 20B certificates required by the petroleum industry, and the products it produces meet the 6A standard. From purchasing raw materials to rough turning of blanks to tempering, nitriding, heat treatment and finishing, the product quality can be guaranteed and the cost can be reduced.
                                      Our corporation reserved a horizontal CNC lathe, GA-3300 in 2022. φ 600* φ 500* φ 600 and vertical CNC lathe VL-750R, φ 780* φ 750* φ 600, all set up and commissioning is profitable and put into operation.
Today, the main body of the new staff canteen of our company has been basically completed and has entered the stage of final inspection and decoration. As a new employee canteen area of our company, this building is expected to be ready for use after interior renovation and surrounding greening in November 2022.
①At the morning of september 25, 2022, the leaders of the district committee visited our organization. hou mengyu, the chairman of the board of directors, and the manipulate of the agency gave a warmness reception.
①At the morning of september 25, 2022, the leaders of the district committee visited our organization. hou mengyu, the chairman of the board of directors, and the control of the organisation gave a heat reception.
x

Enviado satisfactoriamente

Nos pondremos en contacto con usted tan pronto como sea posible

cerca